Released July 16, 2004
----++ Download
See the [[InstallationInstructions011][installation instructions]] if you are not familiar with the standard installation procedure of tarballs or RPMs.
Source tar.gz
* [[http://www.cwi.nl/projects/MetaEnv/aterm/aterm-2.2.tar.gz][aterm-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/sdf2/sdf2-bundle-2.2.tar.gz][sdf2-bundle-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/StrategoXT/strategoxt-0.11.tar.gz][strategoxt-0.11]]
Source RPM
* [[ftp://ftp.stratego-language.org/pub/stratego/aterm/aterm-2.2-1.src.rpm][aterm-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/sdf2/sdf2-bundle-2.2.src.rpm][sdf2-bundle-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/StrategoXT/strategoxt-0.11.src.rpm][strategoxt-0.11]]
Redhat Linux RPM
Redhat 8.0:
* [[ftp://ftp.stratego-language.org/pub/stratego/aterm/aterm-2.2-1.i386-redhat8.0-linux-gnu.rpm][aterm-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/sdf2/sdf2-bundle-2.2.i386-redhat8.0-linux-gnu.rpm][sdf2-bundle-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/StrategoXT/strategoxt-0.11.i386-redhat8.0-linux-gnu.rpm][strategoxt-0.11]]
Redhat 9.0:
* [[ftp://ftp.stratego-language.org/pub/stratego/aterm/aterm-2.2-1.i386-redhat9.0-linux-gnu.rpm][aterm-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/sdf2/sdf2-bundle-2.2.i386-redhat9.0-linux-gnu.rpm][sdf2-bundle-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/StrategoXT/strategoxt-0.11.i386-redhat9.0-linux-gnu.rpm][strategoxt-0.11]]
SuSE Linux RPM
SuSE 8.2:
* [[ftp://ftp.stratego-language.org/pub/stratego/aterm/aterm-2.2-1.i386-suse8.2-linux-gnu.rpm][aterm-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/sdf2/sdf2-bundle-2.2.i386-suse8.2-linux-gnu.rpm][sdf2-bundle-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/StrategoXT/strategoxt-0.11.i386-suse8.2-linux-gnu.rpm][strategoxt-0.11]]
Mac OS X binaries
* [[ftp://ftp.stratego-language.org/pub/stratego/aterm/aterm-2.2-macosx.tar.gz][aterm-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/sdf2/sdf2-bundle-2.2-macosx.tar.gz][sdf2-bundle-2.2]]
* [[http://losser.labs.cs.uu.nl/~mbravenb/software/macosx/strategoxt-0.11-macosx.tar.gz][strategoxt-0.11]]
* [[http://losser.labs.cs.uu.nl/~mbravenb/software/macosx/strategoxt-superbundle-0.11-macosx.tar.gz][aterm-2.2 + sdf2-bundle-2.2 + strategoxt-0.11]]
Microsoft Windows Cygwin binaries
* [[ftp://ftp.stratego-language.org/pub/stratego/aterm/aterm-2.2-cygwin.tar.gz][aterm-2.2]]
* [[ftp://ftp.stratego-language.org/pub/stratego/sdf2/sdf2-bundle-2.2-cygwin.tar.gz][sdf2-bundle-2.2]]
* [[http://losser.labs.cs.uu.nl/~mbravenb/software/win/strategoxt-0.11-cygwin.tar.gz][strategoxt-0.11]]
* [[http://losser.labs.cs.uu.nl/~mbravenb/software/win/strategoxt-superbundle-0.11-cygwin.tar.gz][aterm-2.2 + sdf2-bundle-2.2 + strategoxt-0.11]]
----++ License
StrategoXT is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published
by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This software is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
---------++ Summary of Changes
* Separate compilation is now ready for use
* Shared libraries in the Stratego runtime
* Cygwin and Mac OS X Support (really!)
* Various deployment improvements
* Reduced the size of distributions
* Check dependencies during configure
* Upgrade of SDF packages (pgen 2.2)
* Support for XML Processing
* Generate or transform XML
* Interoperability with XML tools
* Various new or improved tools:
* pack-sdf can now include modules from syntax definitions
* sdf2parenthesize improves the support for implementing
pretty-printers
* sdf2rtg complains about missing start symbols
* New strategies in the Stratego library:
* generate unique names with a prefix
* stateful sets
* make (temporary) directories
* filtering text files
* Various improvements of XTC:
* Construction of build-time XTC repositories
* Compilation of XTC tools with stand-alone strc
* Global choice operator is now much easier to use.
* Many bug-fixes, e.g.
* fixed a bug that causes crashes in large XTC tools
* improvements of new dynamic rules
* mutual recursive lets
---------++ Separate Compilation
The basic implementation of separate compilation of Stratego programs
has been available from [[StrategoRelease094][StrategoXT 0.9.4]], but
the feature has always been experimental. However, it was already
clear that separate compilation drastically reduces the compilation
time of Stratego programs. The open issues in the implementation of
separate compilation, which are mostly configuration related, have all
been resolved in this release, StrategoXT 0.11. Therefore, separate
compilation of Stratego is now ready for use.
First, AutoXT has been extended with support for separate
compilation. Because of the support in AutoXT, using separate
compilation in your packages is very easy. Second, separate
compilation is now also supported for XTC tools, for which it is
particularly useful. Third, the stand-alone Stratego compiler =strc=
now accepts flags for separate compilation. This is very convenient
for small tests programs, or just for testing separate compilation.
The exact details of using separate compilation are explained in a
[[HowToUseSeparateCompilation][how to]] available at the Stratego
website (documentation section).
(Eelco Visser and Martin Bravenboer)
---------++ Shared libraries in the Stratego runtime
In StrategoXT 0.11 the Stratego Runtime System (srts) uses Libtool to
build libraries. This means that shared libraries are created if the
platform supports this. Since linkers by default prefer shared
libraries over static libraries, your programs will be linked against
the shared libraries of the Stratego runtime. This reduces the size of
the executable and the code of the library will be shared by all
Stratego programs.
Using shared libraries introduces the usual problems of locating these
libraries when a program is executed. This might cause problems for
users of your packages: if you do not change the way your programs are
linked, then at most systems the shared libraries will not be found if
the package is installed at a non-standard location. To solve this
issue, we advice to use Libtool for linking, since Libtool adds the
path of a dynamic library to the search path of an executable. For an
overview of all options to avoid or prefer shared libraries, see the
[[HowToUseSharedLibraries][how to use shared libraries]] at the
Stratego website.
(Martin Bravenboer)
---------++ Cygwin and Mac OS X Support
For StrategoXT 0.10 we announced support for Mac OS X. Unfortunately,
this claim soon appeared to be poorly verified: we received several
reports of failures at Mac OS X. For StrategoXT 0.11, we have worked
on solving all these issues and can now safely re-announce support for
Mac OS X. StrategoXT 0.11 has been compiled and checked at two
different Mac OS X 10.3.4 systems with Apple's GCC 3.3
(unpatched). Older versions of GCC will probably not work. From now
on, binary distributions for Mac OS X will be available at the release
page.
Various problems had to be fixed in order to support Mac OS X:
* A very creepy issue with optimizations performed by GCC has been
worked-around in the implementation of the =some= traversal
primitive.
* Various issues with separate compilation at Mac OS X have been
resolved. For example, initializers of dynamic libraries are by
default invoked in a lazy way at Mac OS X, which Stratego separate
compilation does not allow. This issue has been fixed in AutoXT by
passing a flag to the linker at Darwin systems.
* The stand-alone Stratego compiler now passes more standard flags
to GCC.
(Eelco Dolstra, Martin Bravenboer and Dick Eimers)
Cygwin support has also been verified. Unfortunately, separate
compilation is currently not supported at Cygwin, due to limitations
of Microsoft Windows DLLs. As a result, static linking is used for the
separately compiled SSL and executables are rather large. We hope to
fix this in a future release. From StrategoXT 0.11 binary
distributions for Cygwin will be available at the release pages.
(Eelco Dolstra and Martin Bravenboer)
---------++ Various Deployment Improvements
Besides the support for Mac OS X and Cygwin, the deployment of
StrategoXT has been improved at several other points. First, the
distributions of StrategoXT 0.11 are much smaller then the
distributions of the last few releases. A source distribution is now
about 9 MB, which used to be 14 MB. This has been achieved by (1) not
distributing bootstrapped sources of programs that are only used in a
check, (2) not distributing parse tables, (3) reduction of the size of
bootstrapped sources by heavy use of separate compilation in
StrategoXT, (4) removing some tools that are obsolete or not working
properly.
Second, the dependencies of StrategoXT are now finally checked in the
configure script. If the provided configuration is incorrect, then the
configure will fail and explain where the tools were expected in the
configuration provided (or not) by the user. The configure scripts
checks for the ATerm-gcc library in the aterm package, which reflects
the requirement to configure this package with the --with-gcc
flag. The StrategoXT configure script now also checks for several
tools that are part of the packages of the sdf2-bundle.
The checks have been implemented as macros (=XT_PKG_ATERM= and
=XT_PKG_SDF=) in AutoXT, so you can use them in your package as
well. The macro =XT_PKG_STRATEGOXT= can be used if you want to check
that the provided configuration for StrategoXT is correct. This macro
checks that some essential tools in StrategoXT are available at the
specified prefix. If you want to, then you can also invoke the checks
for the specific program directly: they are available as XT_PROG_
macros in AutoXT.
(Martin Bravenboer)
---------++ Upgrade of SDF Packages
StrategoXT 0.11 uses a new version of the SDF language and its
implementation. The SDF packages are collected in the sdf2-bundle 2.2,
which is available at the release page of StrategoXT 0.11.
%RED%Important: %ENDCOLOR% the new version of SDF contains a new
construct for declaring start symbols of the syntax definition. In
older versions of SDF there was no way to declare start
symbols. Instead, all declared sorts were implicitly added as start
symbols. You must add this new explicit declaration of start-symbols
to your syntax definition, otherwise the generated parse table will
not parse anything at all. For example, if you want =Module= to be a
start symbol of your syntax definition, then you should add a
declaration =context-free start-symbols Module= to you syntax
definition. You can also declare more complex start symbols, for
example lists. Declaring all sorts (in a =sorts= construct)is now
encouraged, since the parse table generator is then able to do more
static checking of the syntax definition and warn you about suspicious
constructs.
(Martin Bravenboer)
---------++ Support for XML Processing
StrategoXT 0.11 has a new sub-package: _xml-front_. This package
contains an SDF syntax definition for XML, a pretty-printer for XML,
an embedding of XML in Stratego, and various tools for XML
processing. The syntax definition of XML and the accompanying tools
can be used for the implementation of XML transformations, for
generating XML (e.g. XHTML web pages) or for interoperability with
external XML-based tools. How to use the tools of xml-front for XML
applications will be explained in some howtos at the Stratego
Wiki. The first one will explain the embedding of XML in Stratego,
which is in particular useful for generating XML in Stratego programs.
(Martin Bravenboer)
---------++ New and Improved Tools
Many tools in StrategoXT have been improved. Some highlights:
_pack-sdf_ now supports the "-Idef Foo.def" flag. This flag can
be used to import SDF modules (.sdf) from an SDF syntax definition
(.def). The order of mixed -I and -Idef arguments is respected.
_sdf2parenthesize_ is a new tool that generates a Stratego
transformation tool that adds the necessary parentheses to an abstract
syntax tree. The information is obtained from an SDF syntax
definition. The tool handles associativity, relative priorities, and
groups of associative productions. The tool has successfully been
applied to improve the pretty-printers of Stratego in stratego-front
and Java in JavaFront. The tool is explained in more detail at the
Tools web: [[Tools.SdfToParenthesize][sdf2parenthesize]].
_sdf2rtg_, which is used for the generation of Stratego
signatures, now uses the real start symbols of the SDF syntax
definition and not the declared sorts. sdf2rtg also complains if the
syntax definition contains no start symbols at all.
(Martin Bravenboer)
---------++ New strategies in the Stratego library
The Stratego Standard Library has been extended with several useful
strategies.
The =newname= strategy is a variant of the =new= strategy. It
generates unique strings, just like new, but it also accepts a prefix
that will be part of the generated string. By default, the numbering
is also done per prefix. For example, if you apply =newname= three
times to the string ="foo"=, then the results will be ="foo_0"=,
="foo_1"= and ="foo_2"=. If =newname= is applied to ="bar"= after
this, then the result will be ="bar_0"=, not ="bar_4"=. Thus, The
=newname= strategy is very useful for generating more user-friendly,
unique names in a program transformation.
(Arthur van Dam)
The new =sets= module provides support for efficient, stateful sets,
comparable to stateful hashtables in the =tables= module. Like
hashtables, the set implementation is based on an implementation of
this data structure in the ATerm library.
(Martin Bravenboer)
The =posix-file= module has been extended with the directory
primitives =mkdir= and =rmdir=. The new strategy =filemode= returns
the mode of a file. The strategy =mkdtemp= can be used to created
temporary directories, similar to =mkstemp=.
The module =char-io= has been extended with the strategy
=filter-text-file= for filtering character sequences from text
files. This strategy is especially useful if you need to filter a file
in a way that depends on characters in multiple lines of the
input. =filter-text-file= is parameterized with two strategies: a
strategy for transforming the current 'chunk' of characters and a
strategy to commit the current chunk.
(Eelco Visser)
---------++ Various improvements of XTC
In StrategoXT 0.11 AutoXT constructs build-time XTC repositories. Such
a build-time XTC repository refers to files in the build tree, instead
of the installation directory. The build-time repository is named XTC
and is created in the top-level directory of the build
tree. Build-time repositories can be used to invoke tools in the build
tree at build- or check-time. Thus, build-time XTC repositories can be
used to support a 'make check' without having the package
installed. Indeed, the StrategoShell and JavaFront have already been
changed to use the build-time repositories and now fully support a
pre-install check and 'make distcheck'. For StrategoXT a 'make
install' is still required before you can do a 'make check'.
From StrategoXT 0.11, XTC tools can be compiled with stand-alone
Stratego compiler. Until now, XTC tools could only be compiled in
complete AutoXT-based packages. From this release, =strc= takes a flag
=--xtc-repo= to set the default XTC repository when invoking strc as a
full program compiler. This argument has no meaning if strc is
instructed to produce only C code. The definition of a default XTC
repository with the =--xtc-repo= flag is optional: if you leave it
out, the tool will have no default XTC repository and will use the
environment variable =XTC_REPOSITORY= or a repository that is passed
to the tool when it is invoked. In this way, it is now much easier to
implement ad-hoc Stratego programs that invoke other tools using
XTC. It might also be useful for users that are new to XTC and just
want to experiment without setting up an entire package.
(Martin Bravenboer)
---------++ Global choice operator
The global choice operator is now much easier to use. The global
choice operator =++= was introduced in Stratego 0.7, but to use it,
StrategoXT had to be configured with the location of the CPL. If
the CPL was available, then it was used for _all_ programs compiled
with this installation of StrategoXT. In StrategoXT 0.11 we
have moved the choice for the implementation of choice-points to
link-time. This is now much more flexible and easy to use: the new
version of the CPL for StrategoXT (will be released in a few
days) can be installed _after_ the installation of StrategoXT and
for each program you can decide if you want to use the implementation
of global choices in the CPL. If a program uses the global choice, but
it is not linked with the CPL, then linking will fail.
If the CPL is installed and registered in the XTC repository of
StrategoXT, then the Stratego compiler accepts a new argument =--cpl=,
which will link the program with the CPL. The argument is not visible
if the CPL has not been registered in the XTC repository that is used
by strc. The new configuration for the CPL and the new strc option for
linking with the CPL, make it very easy to experiment with the global
choice implementation.
(Martin Bravenboer)
---------++ Many bug-fixes
In StrategoXT 0.11 many bugs have been fixed in tools, the library,
and the compiler. Some highlights:
* fixed a bug in the implementation of =mkstemp= that causes
segmentation faults in large programs that use this strategy. In
particular, all XTC tools in 0.9.4, 0.9.5 and 0.10 are
affected. The segmentation fault occurs during garbage collection
of ATerms by the ATerm library.
* Several bugs have been fixed in the new implementation of dynamic
rules, which was introduced in StrategoXT 0.10. Also, the
performance of scope labeling has been improved by applying the
new stateful sets.
* In the backend of the Stratego compiler a bug has been fixed in
the generation of code for mutual recursive strategies declared
locally in a let. The backend of strc now declares all local
functions before defining them.
(Martin Bravenboer and Arthur van Dam)
---------++ Detailed List of Issues
The full list of issues closed in this release is available at:
* http://www.stratego-language.org/Stratego/StrategoRelease011Issues
---------++ Bugs and Known Problems
See our issue tracking systems for reports about (open) bugs:
* %JIRA%
For an overview of features planned for future releases:
* Release plan: http://www.stratego-language.org/Stratego/ReleasePlan
* To do: http://www.stratego-language.org/Stratego/ToDo
Please report any problems with installation or bugs in the
implementation to our issue tracking system. Please check the existing
issues to see if a report about the problem was already submitted.
---------++ Contributions
Developments, beta tests, and bug fixes were carried out by
* Martin Bravenboer
* Arthur van Dam
* Valentin David
* Eelco Dolstra
* Dick Eimers
* Kyle Ross
* Clement Vasseur
* Rob Vermaas
* Eelco Visser
Thanks a lot to the people working on the Transformers project. Their
immediate feedback to changes in StrategoXT is very useful.